你好。
Hello.

在本教程中，我们将进行私刑，并通过私刑示例和以前的老故事来学习正常、打开和关闭以及或或不接触的用法。
In this tutorial, we will do lynching and on lynching example and previous story of the older to learn normal, to open and close and also or and or not contacts usage.

我会告诉大家一切都好，然后我会开始再次与 LDM 一起写一个法庭，例如。
And I will tell it is all OK, and then I will start to write a court again with LDM, for example.

10.

10.

好的。
OK.

并健康地来到这里。
And into here healthy.

我是11。
I am 11.

现在到这里让这个电路。
And now to here to let this circuit.

我将只插入 LV y 零。
I will insert just LV y zero.

好的，然后一根线到这里，再到这里一根垂直线。
OK, then one line to here and into here one vertical line.

让我们连接到这条线。
And let's put a connection to this line.

让我们完成该图。
Let's complete the diagram.

还有一件事。
And one more thing.

再多一行，然后就OK了。
And one more line, then OK.

如果 Martin 活跃而不是 M11 会发生什么？
What will happen if Martin is active and not M11?

好的，然后我把这个 11 放到错误的 y 平方上，因为 y 零将被激活。
OK, then I put this 11 to wrong square y because y zero will be active.

然后通过此联系人，它将始终处于活动状态。
Then via this contact, it will be active always.

因此，这11个人必须在这里，好吗？
Because of that, these 11 must be here, OK?

而这条垂直线一定是到这里的。
And this vertical line must be the to here.

那么好吧，那么这就是我的开始。
Then OK, then this is my start.

好的。
OK.

这是我的停靠站，这是我的锁定触点。
And this is my stop, and this is my latching contact.

我将转换这个项目，并将其发送到复制品和执行的主项目。
And just I will convert this project and I will send it to duplicate and to main project that's executed.

现在我们正在写作。
And now we are writing.

这为什么重要呢？
This is why important?

因为想象一下，如果您只想按一次启动按钮，并且想要连续运行机器。
Because of imagine if you want to press a start button just one time and you want to run machine continuously.

当您按一次按钮时，您可以根据设定的说明将节拍、任何节拍或任何条件设置到奖学金计划中。
And when you press a button one time you can set a beat, any beat or any condition into fellowship programs, according to the set instructions.

然后你就可以使用它并运行你的了。
Then you can use it and you can run your.

整机，根据你只要按一下脉冲，然后设置任何东西，它就可以按照它运行。
Complete machine, according to your just one pulses press, then set up anything and it can run according to it.

另外，你可以使用指控电路，好吗？
Also, you can use alleging circuits, OK?

只需按下一次，输出就会被激活，并且输出激活的那一刻。
Just one time it's pressed and the output will be active and that moment when the output is active.

根据此输出触点，您可以添加电路，并且还可以使用制动器和其他条件来打破锁存器，现在将看到它完成。
According to this outputs contact, you can add circuits and you can break the latch also with the stopper and other conditions that will see it now completed.

让我们进入监控模式。
Let's go to monitor mode.

好的，让我们检查一下脉冲现在是否正在运行。
OK, let's check the pulse is running now.

好的，棒极了。
OK, very good.

将此M10带装置测试。
This M10 with the device test.

我会说拨动力，然后你会看到虚空激活比11通常紧密接触因为这个强大，当然，到右侧。
I will say toggle force, then you will see emptiness activated than 11 normally close contact because of this powerful, of course, to the right side.

为什么零被激活 如果我说切换 Foster M10，您会看到我们仍然有一个关于为什么为零的输出？
Why zero is activated If I say toggle Foster M10, you will see we still have an output on why zero?

那么为什么会激活零输出呢？
So why zero output is activated?

如何使用 M11 打破这个循环？
How can I break this loop with the M11?

例如，这是您的停止按钮，根据设备的口味，我将使其快速切换，然后更改接触状态并变得更明智或一次关闭。
This is your stop button, for example, and with the device taste, I will just make it toggle fast that it's toggled, then change the condition of the contact and wiser or became an off one time.

当这种接触发生的那一刻，这种状况就消失了。
And that moment this contact became of, then the condition is gone.

再次切换为 false。
And again, toggle false.

这个变化发生了什么？
What happened this change?

M11的情况已经改变，但是没有输出，因为为什么然后有人需要再次按下启动按钮并设备尝试，然后让我们先按下切换按钮。
The situation has changed off the M11, but there is no output because of why then somebody needs to press start button again and device taste, then lets press the toggle first.

然后我们有一个输出，有人按下这个按钮。
Then we have an output somebodies press this button.

想象一下，然后将手从开始按钮上松开，然后现在消失。
Imagine then released his hand from the start button, then now dissolve.

但是，我们仍然有输出，有人来到机器附近，按下停止按钮，然后再次松开他或她的手。
But still, we have an output and somebody came to the nearby of the machine and pressed the stop button just one and again released his or her hand.

没有输出。
There is no output.

好的，这就是本教程的锁存或解锁电路，并将其完成到下一个材料中。
OK, this is the latching or unlocking circuit for this tutorial and finished it into an next material.

我们将看到如何使用向上和向下接触类型？
We will see how can we use up and down contact types in?

我们怎样才能全部使用它们呢？
How can we use them all?

介绍三菱的开发商。
Introduce developer for the Mitsubishi.

请参阅 Infinix 的教程。
Please see you Infinix's tutorial.